Introduction

316Ti Stainless Steel Plate (also SS 316Ti Plate, AISI 316Ti Plate, UNS S31635 Plate, Titanium Stabilized Stainless Steel Plate, 316Ti Hot Rolled Plate, 316Ti Cold Rolled Sheet, Corrosion Resistant Stainless Steel Plate) is a titanium‑stabilized austenitic stainless steel designed to resist intergranular corrosion after welding or exposure to high temperatures. It conforms to ASTM A240 316Ti Plate, ASME SA240, EN 1.4571, DIN 1.4571, and JIS SUS316Ti. This heat resistant stainless steel plate combines the corrosion resistance of 316 with titanium stabilization, preventing sensitization and carbide precipitation in the heat‑affected zone of welds.

Key properties of 316Ti stainless steel plate:

• Titanium stabilized stainless steel – titanium addition (5×C min.) binds carbon, preventing chromium carbide precipitation at grain boundaries

• Intergranular corrosion resistance – retains corrosion resistance in as‑welded condition without post‑weld heat treatment, ideal for heavy‑walled welded equipment

• Excellent weldability – suitable for all standard welding processes (GTAW, GMAW, SMAW, SAW) with matching filler metal (ER316Ti or 316L)

• High temperature corrosion resistance – superior to 316L in service between 450°C‑850°C (840°F‑1560°F) where sensitization may occur

• Sensitization resistant stainless steel – no loss of corrosion resistance after long‑term thermal exposure, making it ideal for heat exchangers and boiler components

• Oxidation resistance – good scaling resistance up to 900°C (1650°F) in intermittent service

• Chloride corrosion resistance – similar to 316L, excellent resistance to pitting and crevice corrosion in marine and chemical environments

• Long term thermal stability – mechanical properties and corrosion resistance maintained after extended service at elevated temperatures

Note: 316Ti is the preferred grade for welded equipment operating in the sensitization temperature range (450‑850°C), such as exhaust systems, heat exchangers, and refinery vessels. For purely low‑temperature, non‑welded applications, 316L may be more cost‑effective.

This pressure vessel stainless steel plate is available in hot rolled (thick plate) and cold rolled (sheet) forms, with pickled, polished, brushed finish, or mill finish surfaces. We offer custom sizes, cut to size, heavy thickness, and pressure vessel grade plates. Our product range includes 316Ti stainless steel sheet, plate, hot rolled plate, cold rolled sheet, and cut‑to‑size plates.

Specifications & Process Options

We provide 316Ti Plate Thickness Chart, Sheet Dimensions, Weight Chart – request yours.

Applications

1. Petrochemical Plants & Refinery Equipment

• 316Ti stainless steel plate for petrochemical plants – distillation column trays, reactor shells, heat exchanger baffles, and storage tank liners in high‑temperature, corrosive service (sulfur‑containing feeds, naphthenic acid, chlorides). Titanium stabilized stainless steel plate resists weld decay in large fabricated vessels.

• 316Ti stainless steel plate for refinery equipment – crude oil heater shell plates, vacuum tower internal supports, and coker drum flanges. High temperature stainless steel plate withstands cyclic thermal loading without sensitization.

• Welded fabrication stainless steel plate – ideal for shop‑welded and field‑welded tanks, ducts, and pressure vessels requiring post‑weld heat treatment avoidance.

2. Pressure Vessels & Heat Exchangers

• 316Ti stainless steel plate for pressure vessels – ASME Code stamped vessels for high temperature chloride service, such as amine regeneration columns, sour water strippers, and hot oil filters. Intergranular corrosion resistant plate eliminates risk of weld failure during service.

• 316Ti stainless steel plate for heat exchangers – shell plates, tube sheets, and pass partition plates in shell‑and‑tube exchangers operating between 400‑800°C (e.g., waste heat recovery, fired heaters). Long term thermal stability ensures integrity over decades.

3. Exhaust Systems & High Temperature Piping Systems

• 316Ti stainless steel plate for exhaust systems – automotive exhaust manifolds, flexible pipe bellows, and diesel oxidation catalyst housings. Oxidation resistant stainless steel withstands hot exhaust gases up to 800°C without scaling.

• 316Ti stainless steel plate for flue gas systems – flue gas desulfurization (FGD) absorber tower liners, ductwork expansion joints, and stack inlet dampers. Corrosion resistant pressure vessel material resists low‑pH, chloride‑rich condensate.

4. Power Plants & Chemical Processing Equipment

• 316Ti stainless steel plate for power plants – superheater support plates, reheater tube hangers, and boiler casing panels in biomass and waste‑to‑energy plants. Heat resistant stainless steel sheet resists ash corrosion and thermal fatigue.

• 316Ti stainless steel plate for chemical processing equipment – reactor jackets, mixing tank baffles, and distillation column packings for acrylic acid, phthalic anhydride, and maleic anhydride plants. Sensitization resistant stainless steel maintains purity of organic products.

Why Choose Us as Your 316Ti Stainless Steel Plate Supplier?

We are a reliable 316Ti stainless steel plate supplier, 316Ti stainless steel plate manufacturer, UNS S31635 plate supplier, titanium stabilized stainless steel plate specialist, high temperature stainless steel plate provider, welded structure stainless steel plate expert, heat resistant stainless steel sheet stockist, corrosion resistant steel plate manufacturer, petrochemical grade stainless plate supplier, pressure vessel stainless steel plate fabricator, industrial stainless steel plate supplier, and China 316Ti stainless steel plate factory. All plates meet ASTM A240 / ASME SA240 with mill test certificates, chemical analysis, mechanical property reports, and NDT (ultrasonic) for thick plates as required.

What we offer:

• Forms: Hot rolled plate, cold rolled sheet

• Thickness: 0.5mm – 100mm; 316Ti Plate 3mm, 6mm, 10mm, 20mm, 25mm in stock

• Standard sheet size: 4x8 (1220x2440mm) – 316Ti Sheet 4x8

• Surface finishes: pickled, polished, brushed finish, mill finish (2B/2D)

• Services: cut to size, custom size, cut‑to‑length, shearing, plasma cutting

• Certifications: EN 10204 3.1, PMI, ASME SA240 compliance, full traceability

• Global shipping: Exporter to petrochemical plants, pressure vessel fabricators, and refinery equipment manufacturers worldwide

Contact us for 316Ti Plate Thickness Chart, Sheet Dimensions, Weight Chart, or a quote on 316Ti Plate 3mm, 6mm, 10mm, 20mm, 25mm, 4x8 sheet, polished, brushed finish, or custom requirements.

MONO Group is one of 316Ti Stainless Steel Plate and other stainless steel Manufacturer, Supplier, Wholesaler from China, We can supply ASTM / DIN / ISO / GB stndard high quality alloy plate, sheet, round bar, tube, pipes, fittings, flange, pls contact us freely for your RFQ to info@monokj.com