Introduction

AMS 4965 Titanium Bar is an aerospace-grade specification for Ti-6Al-4V Titanium Bar (Grade 5), also known as Grade 5 Titanium Bar, UNS R56400 Titanium Bar, or Ti-6Al-4V Titanium Bar AMS 4965. This aerospace titanium alloy is the most widely used titanium grade, offering an ideal balance of high strength titanium alloy bar, lightweight titanium rod, excellent corrosion resistance titanium bar, and high strength to weight ratio titanium (approximately 40% lighter than steel with comparable strength).

Compared to commercial standards (ASTM B348 Grade 5 Titanium Bar), AMS 4965 imposes tighter chemistry, mechanical properties, and quality assurance requirements, making it mandatory for critical aerospace and defense applications. This fatigue resistant titanium alloy also exhibits heat resistant titanium rod capabilities (service up to 300°C), weldable titanium alloy bar characteristics, and seawater resistant titanium rod performance for marine environments.

Our product range includes AMS 4965 Titanium Bar, Titanium Round Bar AMS 4965, Titanium Rod AMS 4965, Aerospace Titanium Bar, Titanium Forged Bar, Titanium Bright Bar, Titanium Flat Bar, and Precision Ground Titanium Bar – all available in various titanium bar diameters, titanium rod sizes, and custom size titanium bar configurations.

Key standards & equivalents:

• AMS 4965 Titanium Bar / AMS 4965 Ti-6Al-4V / AMS 4965 Grade 5 Titanium

• Ti-6Al-4V Titanium Bar AMS 4965 / UNS R56400 Titanium Bar

• Aerospace Titanium Alloy AMS 4965 / Titanium Alloy AMS 4965 Specification

• Titanium Round Bar Specification AMS 4965 / ASTM B348 Grade 5 Titanium Bar (commercial)

• Titanium Grade 5 Round Bar / ISO 5832-3 (medical equivalent)

Our products meet Titanium Round Bar Specification AMS 4965 with full traceability and mill test certificates.

Specifications & Process Options

We provide Titanium Rod Size Chart and Titanium Bar Diameter Chart – request yours.

Applications

1. Aerospace & Aircraft Industry

(titanium bar for aerospace, titanium rod for aircraft industry, titanium bar for turbine components)

• Aerospace titanium bar – AMS 4965 titanium round bars are machined into jet engine components (compressor blades, discs, spacers, casings), airframe structural parts (wing spars, fuselage frames, landing gear components), and engine mounts. The high strength to weight ratio titanium directly reduces aircraft weight, improving fuel efficiency and payload capacity.

• Titanium bar for turbine components – heat resistant titanium rod with fatigue resistant titanium alloy properties withstands high centrifugal loads and elevated temperatures in compressor sections.

• Titanium rod for aircraft industry – used for hydraulic actuators, control rods, fasteners, and tie rods. Durable aerospace titanium bar ensures long-term reliability under vibration and cyclic stress.

2. Oil & Gas, Marine & Offshore

(titanium bar for oil and gas, titanium alloy rod for marine applications)

• Titanium bar for oil and gas – Grade 5 round bars machined into downhole tools, valve stems, pump shafts, and subsea connector components. Corrosion resistant titanium bar resists H₂S, CO₂, chlorides, and sour service environments.

• Titanium alloy rod for marine applications – propeller shafts, rudder hardware, seawater pump shafts. Seawater resistant titanium rod is immune to biofouling and crevice corrosion in warm seawater.

• Titanium round bar stockist supplies AMS 4965 bars for offshore platform risers and firewater system components.

3. Industrial Equipment & High Performance Engineering

(titanium rod for industrial equipment, titanium bar for high performance engineering)

• Industrial titanium alloy bar – used for chemical reactor agitator shafts, centrifuge components, and heat exchanger tubesheets. Excellent corrosion resistance titanium bar withstands hydrochloric acid, sulfuric acid, and wet chlorine.

• Titanium bar for high performance engineering – racing car suspension links, connecting rods, exhaust system components, and aftermarket performance parts. High strength titanium alloy bar with lightweight titanium rod reduces unsprung mass and rotational inertia.

4. Fasteners & Structural Applications

(titanium bar for fasteners, titanium rod for structural applications)

• Titanium bar for fasteners – machined into bolts, nuts, studs, and washers for aerospace and marine assemblies. Weldable titanium alloy bar allows fabrication of complex structures.

• Titanium rod for structural applications – bridge components, building cladding supports, and lightweight trusses where high performance titanium alloy provides corrosion-free, lightweight structural integrity.

5. Automotive & Motorsports

(titanium alloy rod for automotive industry)

• Titanium alloy rod for automotive industry – aftermarket connecting rods, valve spring retainers, and exhaust system hangers. The high strength to weight ratio titanium improves engine response and reduces reciprocating mass.

Why Choose Us as Your AMS 4965 Titanium Bar Supplier?

We are a leading titanium bar supplier, titanium rod manufacturer, and titanium round bar stockist – a trusted titanium bar exporter with extensive experience in AMS 4965 Titanium Bar. All our bars meet the Titanium Alloy AMS 4965 Specification and are supplied with mill test certificates, full traceability, and NDT reports as required.

What we offer:

• Complete product forms – Round Bar, Rod, Flat Bar, Forged Bar, Bright Bar, Precision Ground Titanium Bar

• Grade focus – Ti-6Al-4V (Grade 5 / UNS R56400) per AMS 4965

• Processing flexibility – Hot rolled titanium bar, cold drawn titanium rod, forged titanium bar, precision ground, polished titanium rod

• Wide size range – from Titanium Bar 10mm to 250mm diameter, Titanium Rod 1 inch, Titanium Bar 2 inch, and larger

• Custom solutions – Custom size titanium bar, titanium bar cut to size, CNC machined titanium bar, titanium bar surface finish to your requirements

• Global shipping – As a titanium bar exporter, we deliver worldwide

Contact us for Titanium Rod Size Chart, Titanium Bar Diameter Chart, Titanium Round Bar Dimensions, or a quick quote on Titanium Bar 10mm, Titanium Rod 20mm, Titanium Round Bar 50mm, Titanium Bar 100mm, or any custom requirement.

MONO Group is one of AMS 4965 Titanium Bar and Titanium alloy Manufacturer,Supplier,Wholesaler from China, We can supply ASTM / DIN / ISO / GB / AMS stndard high quality Titanium plate, sheet, round bar, wires, tube, pipes, fittings, flange, pls contact us freely for your RFQ to info@monokj.com